Biomass Fuels for Steam & Power

Characteristics, cost, and CO₂ of biomass fuels — and coal / natural-gas blending to raise density and cut carbon.

Why this comparison matters

Lowering the CO₂ signature of steam and power generation comes down to four decisions — and biomass is the lever.

Lower the CO₂ signature

Biomass is biogenic — near net-zero over its lifecycle, because the carbon it releases is reabsorbed as the feedstock regrows.

Keep steam reliable

Energy density and handling must suit the boiler — not every fuel works everywhere.

Keep cost in line

Compare cost per BTU, not just per ton — the true, apples-to-apples fuel cost.

Blend to win

Mixing biomass with coal or gas lifts density and cuts net CO₂ — see the blending comparison →

How we compare fuels

HHV (BTU/lb) — how much heat one pound releases.
MMBtu/ton — total heat in a ton — the energy-density yardstick.
$/MMBtu — the true, apples-to-apples fuel cost.
kWh/ton — steam/electric output per ton (thermal; × ~35% for electric).
Gross vs. net CO₂ — biomass emits CO₂ at the stack, but it's reabsorbed as it regrows — so net ≈ 0.

Fuel characteristics at a glance

Fuel HHV (BTU/lb) Moist. Ash MMBtu/ton $/ton $/MMBtu CO₂ lb/MMBtu
Wood pellets (premium)7,8008%0.5%15.6$180$11.54195
Torrefied (black) pellets9,2007%0.8%18.4$250$13.59195
Bagasse (cane strippings)4,00050%3%8.0$20$2.50195
Rice husks5,40012%1.5%10.8$30$2.78195
Corn cobs7,00025%5%14.0$50$3.57195
Nut shells (almond/walnut)8,3002.5%1%16.6$100$6.02195
Bituminous coal12,500——25.0$70$2.80205.7
Sub-bituminous coal (PRB)8,80010%17%17.6$15$0.85212.7
Natural gas— (gas)——47$165$3.50117

All figures are indicative (late 2025) and editable. Blends by weight unless noted; kWh is thermal (× ~35% for electric).

Energy density (highest to lowest)

Densest fuels

  • Bituminous coal — 12,500 BTU/lb · 25.0 MMBtu/ton
  • Torrefied (black) pellets — 9,200 BTU/lb · 18.4 MMBtu/ton
  • Sub-bituminous coal (PRB) — 8,800 BTU/lb · 17.6 MMBtu/ton
  • Nut shells — 8,300 BTU/lb · 16.6 MMBtu/ton

Lighter fuels

  • Wood pellets — 7,800 BTU/lb · 15.6 MMBtu/ton
  • Corn cobs — 7,000 BTU/lb · 14.0 MMBtu/ton
  • Rice husks — 5,400 BTU/lb · 10.8 MMBtu/ton
  • Bagasse — 4,000 BTU/lb · 8.0 MMBtu/ton

Natural gas sits apart at ~20,000+ BTU/lb (47 MMBtu/ton).

Cost per MMBtu (cheapest first)

FuelCostCost per MMBtu
Sub-bituminous coal (PRB)$15/ton$0.85/MMBtu
Bagasse (cane strippings)$20/ton$2.50/MMBtu
Rice husks$30/ton$2.78/MMBtu
Bituminous coal$70/ton$2.80/MMBtu
Natural gas$165/ton eq.$3.50/MMBtu
Corn cobs$50/ton$3.57/MMBtu
Nut shells (almond/walnut)$100/ton$6.02/MMBtu
Wood pellets (premium)$180/ton$11.54/MMBtu
Torrefied (black) pellets$250/ton$13.59/MMBtu

PRB coal is cheapest; bagasse and rice husk are very cheap biomass. Wood pellets are the premium — dense, dry, and consistent.

Gross vs. net CO₂ — the key insight

FuelGross CO₂ lb/MMBtuNet CO₂ lb/MMBtu
Bituminous coal206206 (fossil)
Natural gas117117 (fossil)
Wood pellets1950 (biogenic)
Bagasse / husks / cobs / shells1950 (biogenic)

The nuance that changes the math

Biomass stacks high on gross CO₂ but near-zero on net (lifecycle) CO₂. That's why blending biomass into coal or gas cuts net CO₂ even though the raw stack number looks higher.

kWh per ton — pure fuels & blends

Fuel / blendThermal output per ton
Wood pellets (premium)4,572 kWh/ton
Torrefied (black) pellets5,392 kWh/ton
Bagasse (cane strippings)2,345 kWh/ton
Rice husks3,165 kWh/ton
Corn cobs4,103 kWh/ton
Nut shells (almond/walnut)4,865 kWh/ton
Bituminous coal7,327 kWh/ton
Sub-bituminous coal (PRB)5,158 kWh/ton
Natural gas13,774 kWh/ton
50/50 coal + pellets5,949 kWh/ton

Handling & logistics — the reality check

FactorRisk / cost driverFavorable choice
MoistureWet fuels (bagasse, PRB coal) waste heat drying themselvesDrier = better (pellets, torrefied)
GrindingFibrous fuels (bagasse, cobs) need special millsPellets & shells grind easily
StorageBiomass is bulky and can rot / absorb waterCovered, dry storage required
AshRice husk & coal ash = more handling & erosionShells & pellets are low-ash
DensityLight fuels raise transport cost per BTUTorrefied & shells densify value

Key takeaways

Dense biomass wins on energy

Torrefied pellets and nut shells approach sub-bituminous coal.

Cheap biomass exists

Bagasse and rice husk are low $/MMBtu but wet/ashen.

Blend for CO₂

Coal + biomass or gas + biomass cuts net CO₂ while holding density.

Match fuel to boiler

Handling and moisture often decide the real economics.

Compare biomass blending with coal & gas →

How co-firing biomass raises energy density and lowers net CO₂ to stay under EPA and EU carbon caps.

View the blending comparison →